|
Index |
|
LT1 Adjustable Fuel Pressure Regulator Even minor modifications to the LT1 can push its fuel demand high enough to require additional fuel pressure. Machined from high-quality billet aluminum, the DRM adjustable regulator is easily installed. Adjustments are simple with the accompanying tool. |
||||||
|
|||||||
|
Fuel injected engines like the L-98 and LT1 are extremely sensitive to even small fuel pressure changes. This is why DRM offers its adjustable regulator, but without a gauge it is impossible to accurately dial in fuel pressure. This gauge can be used to set fuel pressure to maximize engine output or to make sure your fuel pump is keeping up with demand. |
|||
|
||||
|
DRM-converted and other very high performance L-98 and LT1 engines demand more fuel for maximum performance. The DRM high volume pump will satisfy the thirst of engines producing upwards of 500 horsepower and is easily installed as a replacement for the stock fuel pump. It is required for 300-plus horsepower L-98 engines and LT1 engines producing 350 or more horsepower. |
||||||
|
|||||||
|
DRM uses this Bosch fuel pump to feed its most demanding high horsepower engines. Installed with no fabrication required to the factory fuel tank, it features an integral flat bottomed pick up screen. The pick up fits perfectly in the factory reservoir for maximum performance even at low fuel levels. |
|||
|
||||
|
Engine performance can be reduced by a dirty or clogged fuel filter. Recommended change intervals are every 12 months or 10,000 miles. |
||||||||||||
|
|||||||||||||
|
Increased engine displacement and high horsepower can demand more fuel than stock injectors can deliver. DRM offers a variety of flow balanced, high volume injectors that will meet your engines demands. |
|||
|
||||
Injector Cleaning & Blueprinting Service Dirty injectors can be blamed for poor engine idle, bad mileage and reduced performance. DRM offers a cleaning and blueprinting service that restores your injectors back to new again. If an injector is beyond repair, DRM can replace it with a new injector equal in flow to the remaining units. |
||||
|
||||
|
When its maintenance or repair time, let DRM be your source for replacement AC/Delco components. We have competitively priced any electronic repair or maintenance item that your Corvette, Camaro or Impala may require Note: Electronic components may fit a variety of years, makes and models. Please have this information ready at time of order. |
||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||
Home
| Engine conversion | Engine
Chart
Suspension Conversion | Brake Conversion |
Race
Car Conversion
Induction Components | Suspension Components |
Brake Components
Drive Line Components | Lubricants |
Engine Components
Fuel Components | Ignition Components |
Exhaust
Components
Body Components |
Wheel Components
What's New | Meet Doug | Company Info | DRM today | Scrap Book
DRMC500/RSR
Call DRM today for your custom quote.
at (763) 477-9272
or
e-mail our
Sales Department
Copyright Doug Rippie Motorsports.
All rights reserved.
Prices and specifications subject to change.